Augustus Eyes First Drill Test at St Patrick’s Well With 30g/t Au Rock Chips

Augustus Minerals is closing in on two major newsflow windows at its Music Well Gold Project, with Clifton East scissor-hole assays due mid-to-late October and St Patrick's Well — carrying rock chip results up to 30.4g/t Au — set to receive its first-ever RC drilling.
By William Hadrian -
  • Three RC scissor holes totalling 486m have been completed at Clifton East, drilled at oblique northwest angles to properly test a quartz-pyrite vein set identified by diamond hole MWD0001 that earlier drilling may have missed.
  • All Clifton East RC samples are now at Intertek Laboratory in Kalgoorlie, with assays expected mid-to-late October — while MWD0001 diamond core assays are due within two weeks.
  • St Patrick's Well is next in the queue, carrying rock chip results of 30.4g/t Au, 21.7g/t Au, and 20.4g/t Au across 600m of strike, with the upcoming RC holes representing the first-ever systematic drilling at the prospect.
  • St Patrick's Well sits adjacent to the same major shear zone hosting Clifton East mineralisation and the Celtic gold mine, a geological setting already proven to deliver economic gold.
  • The 1,242km² Music Well Gold Project is 100% owned by Augustus and sits within a district carrying a gold endowment exceeding 28 million ounces, abutting active mines including Darlot, King of the Hills, and Thunderbox.
Summarise with AI:

RC drilling set to resume at Music Well as high-grade St Patrick’s Well moves into the queue

Augustus Minerals is pushing through weather delays at its Music Well Gold Project, 35km north of Leonora in the Leonora/Laverton Greenstone Belt of Western Australia, with two high-priority drill targets now in sight.

Three RC holes totalling 486m have been completed at the Clifton East prospect, before drilling was suspended on 29 August following 120mm of rainfall between early August and early September. Further heavy rain on 6–7 September compounded the delay, with warm weather now expected to dry the access tracks ahead of a site inspection scheduled for Monday next week. Drilling is hoped to recommence within a fortnight.

Two near-term newsflow windows are approaching simultaneously: assays from the first diamond core hole (MWD0001) are expected within two weeks, while all Clifton East RC samples are now at the Kalgoorlie laboratory with results due mid to late October.

Clifton East — scissor drilling strategy targets high-grade quartz vein zones

The three completed RC holes at Clifton East were not routine infill drilling. Diamond drill hole MWD0001 identified a quartz-pyrite vein set oriented sub-parallel to the existing drill holes, meaning those veins risked being missed or undersampled by earlier drilling.

To properly test their frequency and grade, three new holes were drilled at oblique northwest angles to “scissor” the existing holes:

  • MWRC0025: 168m
  • MWRC0026: 168m
  • MWRC0027: 150m

The zone is worth the additional drilling focus. Previously reported intersections from Clifton East include:

The scissor-hole program builds directly on a series of prior Clifton East intersections, including the highest-grade gold result at Music Well recorded in earlier RC campaigns, which established the quartz-pyrite vein system as the primary mineralisation driver across the deposit.

  • 11m @ 2.41g/t Au (MWRC0006, from 32m)
  • 34m @ 0.83g/t Au (MWRC0010, from 38m)
  • 8m @ 3.27g/t Au (MWRC0019, from 72m)
  • 12m @ 0.94g/t Au (MWRC0015, from 39m)

All samples from the three scissor holes are now at Intertek Laboratory in Kalgoorlie, with assays expected mid to late October.

What is scissor drilling — and why does it matter for grade?

When initial drill holes are drilled in one direction, veins running sub-parallel to those holes can be missed or undersampled entirely. Scissor holes are drilled at an oblique angle to cut across those veins, properly testing their frequency and grade.

For investors, this technique directly tests whether higher-grade quartz vein zones exist between the known intersections. If confirmed, it represents a potential grade upgrade scenario for the Clifton East deposit.

St Patrick’s Well — the next drill target is carrying serious numbers

Once the one remaining Clifton East RC hole is completed, the rig moves to St Patrick’s Well, and the rock chip results over 600m of strike explain the anticipation:

  • 30.4g/t Au (ARK0063)
  • 20.4g/t Au (ARK0061)
  • 21.7g/t Au (ARK0141)

These are rock chip samples, not drill intersections, but they are striking figures. Critically, the upcoming RC holes will be the company’s first RC drilling at St Patrick’s Well, a prospect where only limited historic shallow drilling has been conducted, meaning these holes represent a genuine discovery-style catalyst.

Clifton East & St Patrick's Well Drill Targets Comparison

The structural geology adds further weight. St Patrick’s Well lies adjacent to the same major shear zone that hosts Clifton East mineralisation and the Celtic gold mine to the west of AUG tenure — a geological setting that has already proven capable of delivering economic gold.

Andrew Ford, GM Exploration, acknowledged the weather-driven interruption while signalling confidence in the program’s trajectory:

Andrew Ford, GM Exploration

“Nature is throwing up a few challenges at Music Well with 120mm of rain falling between early August and early September… The current RC program started well, and we hope to recommence drilling within the next fortnight.”

Upcoming catalysts and the Music Well investment case

The near-term newsflow sequence for investors is clear:

  1. Site inspection — Monday next week
  2. Drilling recommencement — targeted within two weeks (weather dependent)
  3. Final Clifton East RC hole to be completed
  4. Rig moves to St Patrick’s Well for first-ever RC holes
  5. Assays from MWD0001 (diamond core) — expected within two weeks
  6. Clifton East RC assays — expected mid to late October
Catalyst Prospect Type Expected Timing Status
MWD0001 diamond core assays Clifton East Assay results ~2 weeks Awaited
Drilling recommencement Clifton East RC drilling ~2 weeks Weather dependent
Final RC hole Clifton East RC drilling On recommencement Planned
First RC holes St Patrick’s Well RC drilling Post-Clifton East Planned
Clifton East RC assays Clifton East Assay results Mid–late October Samples submitted

The project itself sits within a district with a gold endowment exceeding 28 million ounces. The 1,242km² Music Well Gold Project, 100% owned by Augustus, abuts active mining operations including the Darlot Gold Mine (~12km north), King of the Hills (~20km west), and Thunderbox (~20km west).

Music Well is the flagship near-term news driver for Augustus, which also holds the Ti-Tree project in the Gascoyne Region of WA and two PNG applications at Mt Kare and Vanapa River. With two assay windows approaching and St Patrick’s Well’s first-ever drill holes on deck, the coming weeks carry real news potential for the stock.

For investors wanting broader context on the company’s exploration portfolio, our dedicated guide to high-grade gold discoveries across Augustus’s Australian projects covers the Music Well and Ti-Tree programs alongside the structural geology settings that make each a priority target for the current drill campaign.

Don’t Miss the Next ASX Gold Discovery

Get FREE breaking ASX gold news delivered to your inbox within minutes of release, complete with in-depth analysis already done. Over 30,000+ investors rely on Big News Blast to stay ahead of the market. Click the “Free Alerts” button to ensure the moment results drop from Music Well or St Patrick’s Well, you hear about it first.


Frequently Asked Questions

What is scissor drilling and why is Augustus Minerals using it at Music Well?

Scissor drilling involves drilling holes at an oblique angle to earlier holes to cut across veins that run sub-parallel to the original drill direction — veins that would otherwise be missed or undersampled. Augustus is using this technique at Clifton East after diamond hole MWD0001 identified a quartz-pyrite vein set that earlier RC holes may not have properly tested.

When will Augustus Minerals release assay results from the Music Well drilling program?

Assays from diamond core hole MWD0001 are expected within approximately two weeks, while results from the three Clifton East RC scissor holes — now submitted to Intertek Laboratory in Kalgoorlie — are expected mid-to-late October.

What are the rock chip results at St Patrick's Well and what do they mean for investors?

Surface rock chip samples at St Patrick's Well returned grades of 30.4g/t Au, 21.7g/t Au, and 20.4g/t Au across 600 metres of strike. These are surface samples rather than drill intersections, but they indicate high-grade gold at surface ahead of the first-ever RC drilling at the prospect, which represents a genuine discovery-style catalyst.

How does St Patrick's Well relate to the broader geology at Music Well?

St Patrick's Well sits adjacent to the same major shear zone that hosts mineralisation at Clifton East and the Celtic gold mine to the west of Augustus's tenure — a structural setting already proven to deliver economic gold in the Leonora/Laverton Greenstone Belt.

Why was Augustus Minerals Music Well drilling suspended and when is it expected to resume?

Drilling was suspended on 29 August after 120mm of rainfall between early August and early September, with further heavy rain on 6–7 September compounding the delay. Warm weather is expected to dry access tracks ahead of a site inspection, with drilling hoped to recommence within a fortnight of the announcement.

William Hadrian
By William Hadrian
Partnerships Director
William supports Discovery Alert subscribers across Australia and overseas, helping them tailor alerts, troubleshoot technical issues, and optimise platform settings to suit their workflow.
Learn More
Companies Mentioned in Article

Breaking ASX Alerts Direct to Your Inbox

Join +30,000 subscribers receiving alerts.
Join thousands of investors who rely on Discovery Alert for timely, accurate mining and commodities market intelligence.